Gates and fences · Desio

Iron gate and fence repair in Desio

Gate dragging on the ground, hinge worn through, rust creeping up the fence? We straighten it, weld it and protect it so it lasts.

Send us a photo of the job on WhatsApp and we’ll reply with a quote.

Iron gate repair in Desio is one of the jobs we're asked for most. Driveway gates, garden gates and iron fences stand outside all year: rain gets into the joints, frost opens up small cracks and the paint starts to flake. Bit by bit the gate drops on its hinges, scrapes the ground and becomes hard to close, and the fence starts to rust from the bottom up.

Most of the time there's no need to replace anything. With gate welding, new hinges or pins and proper rust removal, an old iron gate can be brought back to work smoothly and look cared for again. We do the metalwork and the protective paint in the same visit, so you deal with one person from start to finish. We look after the iron only: motors, control boards and gate automation need an authorised installer.

What we do on gates and fences

Straightening gates that have dropped

We lift a sagging gate back to level, reinforce the frame where it has given way and adjust the stops so it closes cleanly.

Gate welding on site

Cracked rails, loose uprights and broken decorative pieces: we re-weld them in place without removing the gate.

Replacing hinges and pins

Worn pins and rusty hinges are the usual reason a gate drags. We cut off the old ones and weld on new, correctly aligned.

Rust removal down to sound metal

We take rust off with wire brushes and grinding discs until we reach solid iron, because paint over rust never lasts.

Protective repainting

After cleaning, we apply anti-rust primer and an exterior finish, in the same colour as now or a new one you choose.

Fence panels and posts

We re-fix loose panels, straighten bent spikes and replace posts or sections that rust has weakened too far.

Pedestrian gates and side gates

Small garden gates get heavy use. We sort out latches, stops and hinges so they open and shut without a fight.

How we repair a gate, step by step

Send us a photo of the whole gate or fence on WhatsApp, plus close-ups of anything that worries you: the hinges, rust along the bottom rail, a weld that has opened. Tell us your town and, if you know, roughly when it was last painted.

If the job is clear from the photos, we reply with a quote. For long fences or gates in poor condition we prefer to see them first. On the day we always follow the same order: metal repairs and welding first, then rust removal and sanding, and finally primer and paint. If the gate is your only way in, we plan the work so you can still get in and out.

What affects the price of a gate repair

The price depends on the size of the gate or the length of fence, how far the rust has spread and how many parts need re-welding or replacing. A garden gate with one broken hinge is a very different job from a double driveway gate that needs straightening and repainting.

The finish counts as well: touching up the repaired areas only, or repainting the whole thing. Once we've seen the photos, we tell you which option makes sense and what it costs, before any work begins.

Gate and fence repair across Brianza

We repair gates and fences in Desio and the towns nearby, from Seregno and Lissone to Nova Milanese and Muggiò, and on through Cesano Maderno, Bovisio Masciago, Varedo, Meda and Monza. For long boundary fences, condominium gates and other bigger jobs, we also work across Monza and Brianza, the Milan area and the rest of Lombardy.

  • Desio
  • Seregno
  • Lissone
  • Nova Milanese
  • Muggiò
  • Cesano Maderno
  • Bovisio Masciago
  • Varedo
  • Meda
  • Monza

Frequently asked questions

My gate drags on the ground. Does it need replacing?

Almost never. The cause is usually worn hinges or pins, or a joint in the frame that has given way. We lift it back to level and weld it so it stays there.

Do you repair automatic gate motors?

No. We work on the iron structure, welding and painting. Motors, control boards and wiring must be handled by an authorised installer, and we're happy to work alongside one.

Can't I just paint over the rust?

Paint over rust soon bubbles and peels. The rust has to come off first, down to sound metal, then primer and finish go on.

When is the best time to repaint a gate?

Dry, mild days are best, so spring and early autumn. Welding repairs, though, can be done in most weather and are worth sorting before the damage spreads.

Do you work on condominium gates?

Yes. We work with property managers on driveway gates, pedestrian gates and shared fences. For these we usually visit before giving a quote.

Got some ironwork to fix? Message us now.

A photo and a couple of lines are enough. We’ll reply as soon as we can.

  • Mon–Sat 8:00–19:00
Call WhatsApp